TM-9-1290-365-24-P

ARMY TM 9-1290-365-24&P

3.5.4. Inspection

. Inspect Bracket Assembly as follows:

a. Inspect all components for security of attachment.

b. Inspect all parts for damage, wear, and deterioration.

c. Inspect all parts for nicks, scoring, dents, scratches, and broken welds.

d. Inspect all threaded parts for crossed, stripped, or otherwise damaged threads.

e. Inspect threaded inserts and nutplates for security of attachment.

f. Inspect painted surfaces for cracked, chipped, blistered, or deteriorated paint film.

3.5.5. Disassembly

. Refer to Figure 3-11. Disassemble Bracket Assembly as follows:

a. Remove four screws (6), four lockwashers (7), and four flat washers (8) on each of the

four resilient mounts (5) from machined bracket (4). Discard lockwashers (7).

b. Unscrew and remove externally-relieved bolt (1), lockwashers (2) and round plain nut

(3) from machined bracket (4).

3.5.6. Assembly

. Refer to Figure 3-11. Assemble Bracket Assembly as follows:

a. Insert lockwasher (3) and round plain nut (2) on externally relieved bolt (1).

b. Screw externally relieved bolt (1) into machined bracket (4).

c. Position four resilient mounts (5) on machined bracket (4) and secure each with four

flat washer’s (8), four new lockwashers (7), and 4 screws (6). Torque machine screws

(6) to 9.8-10.8 in. Ib (1.11-1.22 N.m).

3.5.7. Removal of Bracket from Transceiver Assy

. Refer to Figure 3-12.

a. Remove four hex socket screws (1 ) and four lockwashers (2).

b. Remove Bracket Assy (3) from Transceiver Assy (4).

3.5.8. Installation of Bracket from Transceiver Assy

. Refer to Figure 3-12.

a. Attach Bracket Assy (3) and Transceiver Assy (4).

a. Install four hex socket screws (1) and four lockwashers (2).

3-30

TM-9-1290-365-24-P - Page 78 of 334