TM-9-2320-209-20-3-2
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 2 OF 4
MAY 1981
TM-9-2320-209-20-3-2 - Page 20 of 552
TM 9-2320-209-20-3- 2
FRAME
2
1 .
Put lever assembly (1) with brakeshoes (2) onto handbrake brake dru m
(3) .
2 .
Put anchor screw (4) through outer brakeshoe (2). Put on spacer washe r
(5) and screw anchor screw into bracket (6) .
3 .
Using 6-inch ruler , check that brakeshoe (2) is flush with handbrake brak e
drum (3) within 1/16inch .
If brakeshoe is not within limit given, ad d
spacer washer(s) (5) .
4. Screw jamnut (7) onto anchor screw (4) .
NOT E
Do not tighten anchor screw (4) too tightly. Make sur e
brakeshoes (2) do not bind .
5 .
Using 1 15/16-inch wrench , screw in anchor screw (4) .
6 .
Using 1 7/16-inch wrench, tighten jamnut (7) .
GO TO FRAME 3
13- 7
Back to Top
