TM-9-2320-209-34-2-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 3

MAY 1981

TM-9-2320-209-34-2-2 - Page 609 of 899

TM 9-2320-209-34-2-2

FRAME 3

1.

Using worm adjusting bearing wrench, Ioosen worm adjusting nut (1).

2.

Make sure keyway in worm thrust washer (2) is alined with key (3) in wormshaft (4).

NOTE

Note how far wormshaft (4) sticks out of housing so that it

can be put back the same way,

3.

Using soft drift and hammer, tap round end of shaft (4) and take out sleeve bearing

(5) and shaft.

4.

Take out key (3). Take off sleeve bearing (5).

GO TO FRAME 4

17-592