TM-9-2320-209-34-2-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 3

MAY 1981

TM-9-2320-209-34-2-2 - Page 611 of 899

TM 9-2320-209-34-2-2

d. Cleaning.

There are no special cleaning

cleanlng proce ures given in Part 1, para 1-3.

e.

Inspection.

procedures needed. Refer to

1.

2.

3.

4.

NOTE

Small chips, burrs or scratches on shafts, gears, and

sprockets can be repaired.

If parts are damaged in

any other way, throw parts away and get new ones.

Check that leveling worm gear (1), second reduction chain sprocket (2), and

shaft (3) have no chips, burrs or scratches.

Check that sprocket (2) and worm gear (1) have no chipped or broken teeth.

Check that shaft (3) is not bent.

Using magna flex, if available, check that worm gear (1), sprocket (2), and

shaft (3) have no cracks.

GO TO FRAME 2

17-594