TM-9-2320-209-34-2-2
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 3
MAY 1981
TM-9-2320-209-34-2-2 - Page 616 of 899
TM 9-2320-209-34-2-2
1.
Put sleeve bearing (1) over shaft (2) and into housing (3). Aline slot on
sleeve bearing so that setscrew (4) will pass by slot.
2.
Put in two
in place.
CAUTION
Make sure that shaft(2) turns freely.
cap screws (5) and two lockwashers (6) to lock sleeve bearing (1)
GO TO FRAME 4
17-599
Back to Top
