TM-9-2320-209-34-2-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 3

MAY 1981

TM-9-2320-209-34-2-2 - Page 618 of 899

TM 9-2320-209-34-2-2

FRAME 5

1.

2.

3.

4.

5.

CAUTION

Do not allow setscrew (1) to enter slot of adjusting bearing (3).

Put setscrew (1) into housing (2).

Using worm adjusting bearing wrench, turn adjusting bearing (3) until ends of shaft

(4) do not move around.

Tighten setscrew (1) until it touches adjusting bearing (3). Back off setscrew

1/2 turn.

Using worm adjusting bearing wrench, back off adjusting bearing (3) until setscrew

(1) is opposite the first indentation on adjusting bearing. Tighten setscrew until it

touches adjusting bearing.

Back off setscrew one turn.

Check that worm gear shaft (4) turns freely.

GO TO FRAME 6

17-601