TM-9-2320-209-34-2-2
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 3
MAY 1981
TM-9-2320-209-34-2-2 - Page 620 of 899
TM 9-2320-209-34-2-2
FRAME 7
1.
Put key (1) in shaft (2).
2. Aline keyway in sprocket (3) with key (1).
NOTE
Make sure that shaft (2) does not move when tapping on
sprocket (3).
3. Using brass hammer, tap sprocket (3) until setscrew hole in sprocket is alined with
setscrew hole in shaft (2).
4.
Tighten setscrew (4).
Put on safety wire (5).
END OF TASK
17-603
Back to Top
