TM-9-2320-209-34-2-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 3

MAY 1981

TM-9-2320-209-34-2-2 - Page 613 of 899

TM 9-2320-209-34-2-2

1.

2.

3.

4.

5.

6.

7.

Measure

Measure

Measure

Measure

Measure

Measure

Measure

NOTE

Readings must be within limits given in table 17-4.

If readings are not within given limits, throw away

part and get a new one.

inside diameter of adjusting bearing (1).

outside diameter of worm gear shaft (3).

adjusting bearing length of adjusting bearing (1).

inside diameter of sleeve bearing (3).

thickness of thrust washer (4).

fit of adjusting bearing (1) on shaft (2).

fit of sleeve bearing (3) on shaft (2).

END OF TASK

Table 17-4. Adjusting Bearing, Wormgear Shaft, and Thrust Washer Wear Limits

Index

Number

1

1

2

3

4

1 and 2

2 and 3

Item/Point of Measurement

Adjusting bearing inside diameter

Adjusting bearing length

Worm gear shaft outside diameter

Sleeve bearing inside diameter

Thrust washer thickness

Fit of adjusting bearing on

shaft

Fit of sleeve bearing on shaft

Size and Fit

of New Parts

(inches)

1.376 to 1.378

2.875

1.371 to 1.372

1.376 to 1.378

0.406

0.0046 to 0.0072

0.0046 to 0.0072

Wear Limit

(inches)

1.581 to 1.383

None

1.366 to 1.367

1.381 to 1.383

0.374

None

None

17-596