TM-9-2320-209-34-2-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 3 OF 3

MAY 1981

TM-9-2320-209-34-2-3 - Page 161 of 592

TM 9-2320-209-34-2-3

FRAME 3

Soldier A

1.

Soldier B

2.

3.

4.

5.

6.

7.

8.

9.

10.

Turn on power to rear winch.

Turn locking latch (1) to the un-

locked position. Push control lever (2) forward. Put on locking

latch.

While soldier A is unlocking latch, turn drum (3) by hand.

Drum must stop turning when drum and clutch mesh.

If brake does not hold, shut down power. Take out drum and shaft

assembly (3 and 4). Refer to para 18-5c, frames 11 through 14.

Take apart clutch and brake plate (5). Refer to para 18-5c, frames

16 through 18.

Check thickness of brake lining (6). Refer to para 18-5e, frame 9.

Check that lining (6) is properly riveted to clutch and brake

plate (5).

Assemble clutch and brake plate (5). Refer to para 18-5f, frames

13 through 15.

Assemble drum and shaft assembly (3 and 4). Refer to para 18-5f,

frames 16 through 19.

Do para 18-5h, frames 1 through 3 again.

GO TO FRAME 4

18-150