TM-9-2320-209-34-2-3
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 3 OF 3
MAY 1981
TM-9-2320-209-34-2-3 - Page 163 of 592
TM 9-2320-209-34-2-3
FRAME 5
Soldier A
Soldier B
Soldier A
Soldier B
1.
Turn on power to rear winch.
Turn locking latch (1) to the
unlocked position.
locking latch.
2.
Put a 1,000-pound
Push control lever (2) forward and put on
weight (3) on end of cable (4).
WARNING
Do not let go of winch clutch with a weight suspended
from cable. Weight could fall and cause personnel
injury and equipment damage.
3.
Operate rear winch to lift weight.
4.
Check that there is no contact between automatic brake pressure
plate (5) and brake lining plate (6).
5.
If contact is made, lower weight to the ground and shut down
power. Adjust pressure plate clearance. Refer to para 18-5f,
frame 8.
GO TO FRAME 6
18-152
Back to Top
