TM-9-2320-209-34-2-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 3 OF 3

MAY 1981

TM-9-2320-209-34-2-3 - Page 160 of 592

TM 9-2320-209-34-2-3

FRAME 2

Soldier A

1.

Turn on power to rear winch.

Turn locking latch (1) to the unlocked

position.

Pull control lever (2) toward seat. Put on locking latch.

Soldier B

2.

Turn drum (3).

The drum must be free of clutch and brake plate

(4) and turn easily.

3.

If clutch and brake plate (4) touches drum (3), shut down power.

Take out drum and shaft assembly (3 and 5). Refer to para 18-5c,

frames 11 through 14.

4.

Check that clutch and brake plate (4) are working correctly. Refer

to para 18-5f, frame 16.

5.

If necessary, take apart clutch and brake plate (4). Refer to para

18-5c, frames 16 and 17.

6.

Check clutch detent sleeve (6). Refer to para 18-5e, frame 8.

7.

Assemble clutch and brake plate (4). Refer to para 18-5f, frames

13 through 15.

8.

Assemble drum and shaft assembly (3 and 5). Refer to para 18-5f,

frames 16 through 19.

9.

Do para 18-5h, frame 1 again. Do steps 1 through 8 again.

GO TO FRAME 3

18-149