TM-9-2320-209-34-2-3
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 3 OF 3
MAY 1981
TM-9-2320-209-34-2-3 - Page 164 of 592
TM 9-2320-209-34-2-3
FRAME 6
Soldier A
1.
Turn on power to rear winch.
Turn locking latch (1) to the
unlocked position. Push control lever (2) forward and put on
locking latch.
WARNING
Do not let go of winch clutch with
from cable. Weight could fall and
and equipment damage.
a weight suspended
cause personnel injury
2.
Operate rear winch to lift weight.
3.
With weight suspended off ground. Shut down power.
4.
Check that automatic brake (3) holds weight (4) on cable (5) for
creeping.
5.
If winch causes weight (4) to creep, lower weight to ground.
Check pressure plate clearance and adjust automatic brake. Refer
to para 18-5f, frame 11.
END OF TASK
18-153
Back to Top
