TM-9-2320-260-34-1

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME 1 OF 2

JULY 1994

TM-9-2320-260-34-1 - Page 147 of 657

TM 9-2320-260-34-1

3-24. ENGINE AND TRANSMISSION REPLACEMENT (Contd)

NOTE

• Perform step 43 for late model engines.

• Ensure terminals are clean before making connections.

43. Install breather tube (18) on breather (20) and elbow (21). Tighten two clamps (19).

44. Install positive wire (35) on alternator (25) with new lockwasher (36) and nut (37).

45. Connect lead (26) to wire (27).

46. Install ground wire (28) on alternator (25) with new lockwasher (29) and screw (30).

47. Insert positive wire (35) and lead (26) in spacer plate (31) and install on alternator (25) with

retaining strap (32), two new lockwashers (33), and screws (34).

48.

Completely seal positive wire (35), lead (26), and inside of terminal cover (22) with adhesive sealant.

49.

Install terminal cover (22) on alternator (25) with two new lockwashers (24) and screws (23).

3-95