TM-9-2320-260-34-1

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME 1 OF 2

JULY 1994

TM-9-2320-260-34-1 - Page 153 of 657

TM 9-2320-260-34-1

3-26. PREPARING REPLACEMENT ENGINE FOR INSTALLATION

THIS TASK COVERS:

a. Removal

b. Installation

INITIAL SETUP

APPLICABLE MODELS

All

TOOLS

General mechanic’s tool kit

(Appendix B, Item 1)

MATERIALS/PARTS

Four insulators (Appendix D, Item 162)

Antiseize tape (Appendix C, Item 50)

Cap and plug set (Appendix C, Item 6)

REFERENCES (TM)

TM 9-2320-260-20

TM 9-2320-260-34P-1

EQUIPMENT CONDITION

l Engine and transmission removed (para. 3-24),

l Transmission removed (para. 8-5).

l Upper and lower radiator hoses removed

(TM 9-2320-260-20).

CAUTION

Cap or plug all openings immediately after disconnecting lines

and hoses to prevent contamination. Remove cap or plugs prior to

installation. Failure to do so may result in damage to equipment.

NOTE

Perform this task when preparing removed engine for installation

into container.

1. Remove shutoff valve (2) and adapter (3) from water manifold (1).

2. Remove water temperature sending unit (4) from water manifold (1).

3-101