TM-9-2320-260-34-1

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME 1 OF 2

JULY 1994

TM-9-2320-260-34-1 - Page 160 of 657

TM 9-2320-260-34-1

3-29. MOUNTING ENGINE ON REPAIR STAND (Contd)

NOTE

Assistant will help with this procedure.

1. Install rear engine mount adapter on rear water header (11) with five washers (8) and screws (7).

2. Install front engine mount adapter on front water header (2) with two washers (3) and screws (4).

3. Install chain on engine lifting brackets (1) and lifting device.

WARNING

4.

5.

6.

7.

All personnel must stand clear during lifting operations. A shifting

or swinging load may cause injury to personnel.

Carefully lift, and position engine (10) against engine repair stand mounting plate.

Aline holes on engine repair stand mounting plate with holes on mounting adapters and engine

access opening (9).

Install engine (10) on repair stand mounting plate with eight washers (5) and screws (6).

Remove lifting device and chain from engine lifting brackets (1).

3-108