TM-9-2320-260-34-1

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME 1 OF 2

JULY 1994

TM-9-2320-260-34-1 - Page 163 of 657

TM 9-2320-260-34-1

3-32. ACCESSORY DRIVE AND PULLEY REMOVAL

THIS TASK COVERS:

Removal

INITIAL SETUP

APPLICABLE MODELS

REFERENCES (TM)

All

TM 9-2320-260-20

SPECIAL TOOLS

TM 9-2320-260-34P-1

Universal puller kit (Appendix B, Item 75)

EQUIPMENT CONDITION

TOOLS

l Engine mounted on repair stand (para. 3-29).

General mechanic’s tool kit

l Air compressor removed (para. 11-3).

(Appendix B, Item 1)

l Fan blade removed (TM 9-2320-260-20).

l Water pump drivebelt removed

(TM 9-2320-260-20).

Removal

1.

Remove nut (2) and washer (3) from accessory driveshaft (7).

2. Using puller, remove accessory drive pulley (4), pin (1), pulley sleeve (5), and oil slinger (6) from

accessory driveshaft (7). Discard pin (1).

3. Remove five screw-assembled lockwashers (9), accessory drive (10), and gasket (8) from cylinder

block (11). Discard gasket (8) and screw-assembled lockwashers (9).

NOTE

For disassembly, cleaning, inspection, and assembly, refer to para. 3-9.

3-111