TM-9-2320-260-34-1

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME 1 OF 2

JULY 1994

TM-9-2320-260-34-1 - Page 513 of 657

TM 9-2320-260-34-1

9-4. TRANSFER REPAIR (Contd)

WARNIN G

All personnel must stand clear during lifting operations. A swing-

ing or shifting load may cause injury to personnel.

NOTE

Assistant will help with step 4.

4. Raise transfer (1) and install on repair stand with seven washers (9) and screws (8) through two

repair stand brackets. Tighten screws (8) 80-100 lb-ft (109-136 N•m).

5. Remove lifting device from transfer (1) by unhooking from lifting bracket (2) or removing two

nuts (3), screws (6), four washers (7), and chain. Install screws (5), lockwashers (4), and nuts (3)

on transfer (1).

6. Record evidence of oil leaks and then clean exterior of transfer (1) (para. 2-8).

9-13