TM-9-2320-272-23-1
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 1 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-1 - Page 706 of 1313
SIDE PANEL CANNOT BE LOCKED IN RETRACT POSITION - Continued
CONDITION/INDICATION
IS SIDE PANEL FULLY RETRACTED?
DECISION
YES - Go to Step (2).
NO - Notify supervisor. Action may not be possible at this level of maintenance.
STEP
2.
IS TOP OF SIDE PANEL CLOSE ENOUGH TO ROOF EDGE IN ORDER TO ENGAGE?
a.
Visually check if top of side panel is t
o
o far out to engage edge of roof.
T0910DAA
Figure 2.
Roof Edge.
b.
If top of side panel is to far out to engage edge of roof, place heavy block of wood against flat surface of
seal retainer opposite locking bar at top of side panel.
c.
Strike block with heavy hammer.
CONDITION/INDICATION
IS TOP OF SIDE PANEL CLOSE ENOUGH TO ROOF EDGE IN ORDER TO ENGAGE?
DECISION
YES - Go to Step (3) to verify problem is solved.
NO - Notify supervisor. Action may not be possible at this level of maintenance.
TM 9-2320-272-23-1
0080
0080-3
Back to Top
