VAN BODY NOT WATERPROOF OR LIGHT TIGHT - Continued
STEP
1.
IS LOWER PART OF SIDE PANEL PROPERLY POSITIONED?
a.
Visually inspect lower part of panel for tightness against van body.
T0909DAA
Figure 1.
Side Panel.
b.
If leak is detected, place heavy block of wood against rub rail at end side of panel were leak occurs.
c.
Strike block with heavy hammer.
CONDITION/INDICATION
IS LOWER PART OF SIDE PANEL PROPERLY POSITIONED?
DECISION
YES - Go to Step (2).
NO - Notify supervisor. Action may not be possible at this level of maintenance.
TM 9-2320-272-23-1
0081
0081-2