VAN BODY NOT WATERPROOF OR LIGHT TIGHT - Continued
STEP
2.
IS END PANEL PROPERLY POSITIONED?
a.
Visually check end panel for sagging.
T0911DAA
Figure 2.
End Panel.
b.
If leak is detected, place heavy block of wood against rub rail at end side of panel were leak occurs.
c.
Strike block with heavy hammer.
CONDITION/INDICATION
IS END PANEL PROPERLY POSITIONED?
DECISION
YES - Go to Step (3).
NO - Notify supervisor. Action may not be possible at this level of maintenance.
TM 9-2320-272-23-1
0081
0081-3