TM-9-2320-272-23-2
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 2 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-2 - Page 1117 of 1417
PULLEY INSTALLATION
1.
Install woodruff key (Figure 3, Item 5) in groove of pulley shaft (Figure 3, Item 6) with flat edge up.
2.
Install pulley (Figure 3, Item 1) on pulley shaft (Figure 3, Item 6) with keyway (Figure 3, Item 7) on woodruff
key (Figure 3, Item 5).
3.
Place alternator pulley (Figure 3, Item 1) in vise (Figure 4, Item 2).
4.
Install washer (Figure 3, Item 3) and locknut (Figure 3, Item 4) on pulley shaft (Figure 3, Item 6). Tighten locknut
90 to 100 lb-ft (122 to 136 N·m).
TM 9-2320-272-23-2
0301
0301-6
Back to Top
