TM-9-2320-272-23-2
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 2 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-2 - Page 1173 of 1417
REMOVAL
1.
Remove screw (Figure 1, Item 15), clamp (Figure 1, Item 3), cable (Figure 1, Item 1), and retaining clip
(Figure
1,
Item
4) from diverter bracket (Figure 1, Item 6).
2.
Remove cotter pin (Figure 1, Item 16) from control rod (Figure 1, Item 5). Discard cotter pin.
NOTE
Tag cables for installation.
3.
Remove cable (Figure 1, Item 1) and spring nut (Figure 1, Item 2)
4.
Remove screw (Figure 1, Item 14), clamp (Figure 1, Item 10), cable (Figure 1, Item 13), and retaining clip
(Figure 1, Item 8) from diverter bracket (Figure 1, Item 7).
5.
Remove cotter pin (Figure 1, Item 12) from control rod (Figure1, Item 9). Discard cotter pin.
6.
Remove heat control cable (Figure 1, Item 13) and spring nut (Figure 1, Item 11) from control rod
(Figure
1,
Item
9). Discard spring nut.
M9798DAA
4
10
11
12
13
14
15
16
5
6
7
8
9
3
2
1
Figure 1.
Cable Removal.
TM 9-2320-272-23-2
0310
0310-2
Back to Top
