TM-9-2320-272-23-2
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 2 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-2 - Page 463 of 1417
PRELIMINARY DISCONNECTIONS
CAUTION
•
Cap or plug all openings after disconnecting lines and hoses to prevent contamination.
Failure to do so may cause damage to equipment.
•
Tie all loose connections away from engine. Failure to do so may cause damage
to
equipment.
NOTE
•
If a special purpose kit is installed on vehicle, refer to Chapter 4, section XV, and make
necessary disconnections and connections.
•
Tag all loose leads, lines, and tubes for installation.
1.
Disconnect tachometer cable (Figure 1, Item 2) from tachometer drive (Figure 1, Item 3) on front of engine
(Figure 1, Item 1).
1
3
2
M9255DAA
Figure 1.
Tachometer Cable and Drive Removal.
TM 9-2320-272-23-2
0213
0213-2
Back to Top
