TM-9-2320-272-23-2
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 2 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-2 - Page 535 of 1417
REMOVAL
WARNING
Support ring gear when removing flywheel screws. Ring gear may fail if not supported. Failure
to comply may result in injury or death to personnel.
CAUTION
Lock flywheel to prevent crankshaft from turning before removing screws.
NOTE
Flywheel and ring gear will be an assembly.
Remove six screws (Figure 1, Item 1), washers (Figure 1, Item 2), clutch space (Figure 1, Item 3), flywheel
(Figure 1, Item 4), and adapter plate (Figure 1, Item 5) from crankshaft rear flange (Figure 1, Item 6).
M9308DAA
1
2
3
4
5
6
Figure 1.
Flywheel Assembly Removal.
END OF TASK
TM 9-2320-272-23-2
0220
0220-2
Back to Top
