REMOVAL
NOTE
Prior to removal, tag wires for installation.
1.
Disconnect two ether start switch wires (Figure 1, Item 3) from harness wires (Figure 1, Item 2) under left side
of dash (Figure 1, Item 1).
2.
Remove nut (Figure 1, Item 5) and ether start switch (Figure 1, Item 4) from left side of dash
(Figure
1,
Item
1).
1
2
5
3
4
M0081DAA
Figure 1.
Ether Start Switch Removal.
END OF TASK
TM 9-2320-272-23-2
0262
0262-2