INSTALLATION
NOTE
Male pipe threads must be wrapped with antiseize tape before installation.
1.
Install adapter bushing (Figure 2, Item 4) in water manifold (Figure 2, Item 3).
2.
Install thermal close valve (Figure 2, Item 5) in bushing (Figure 2, Item 4).
3.
Connect atomizer ether supply tube (Figure 2, Item 6) and thermal close ether supply tube (Figure 2, Item 2)
to adapters (Figure 2, Item 1) on thermal close valve (Figure 2, Item 5).
5
4
3
6
1
1
2
M0088DAA
Figure 2.
Ether Thermal Close Valve and Bushing Installation.
END OF TASK
FOLLOW-ON MAINTENANCE
1.
Hood closed and secured. (TM 9-2320-272-10)
2.
Start engine and check for coolant leaks around thermal close valve and adapter bushing. (TM 9-2320-272-10)
END OF TASK
END OF WORK PACKAGE
TM 9-2320-272-23-2
0264
0264-3/4 blank