TM-9-2320-272-23-2

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 2 OF 5

SEPTEMBER 2012

TM-9-2320-272-23-2 - Page 899 of 1417

CLEANING AND INSPECTION

1.

For General Cleaning Instructions, refer to (Volume 5, WP

0819).

2.

For General Inspection Instructions, refer to (Volume 5, WP

0819).

3.

Replace all parts failing inspection.

END OF TASK

ASSEMBLY

1.

Position nut (Figure 3, Item 13) to mark on accelerator rod (Figure 3, Item 15).

2.

Install ball joint (Figure 3, Item 12) on accelerator rod (Figure 3, Item 15).

3.

Install rod (Figure 3, Item 20) on quick disconnect socket (Figure 3, Item 21).

4.

Install nut (Figure 3, Item 19) on rod (Figure 3, Item 20). Finger tighten nut (Figure 3, Item 19).

5.

Install yoke (Figure 3, Item 18) on rod (Figure 3, Item 20) so several threads are between yoke and nut

(Figure

3,

Item

19).

6.

Install yoke (Figure 3, Item 18) and spring (Figure 3, Item 17) on accelerator rod (Figure 3, Item 15).

NOTE

Assistant will help with Step (7).

7.

Compress spring (Figure 3, Item 17) and install pin (Figure 3, Item 16) in accelerator rod (Figure 3, Item 15).

TM 9-2320-272-23-2

0269

0269-6