TM-9-2320-272-23-3
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 3 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-3 - Page 347 of 1469
REMOVAL
1.
Remove locknut (Figure 1, Item 3) from output shaft (Figure 1, Item 1). Discard locknut.
2.
Using mechanical puller, remove companion flange (Figure 1, Item 2) from output shaft (Figure 1, Item 1).
NOTE
•
Have drainage container ready to catch oil.
•
Use drain pans to retain leaking/draining fluids. Refer to local procedures and plans for
preventing and responding to fluid spills or leaks. Comply with local regulations when
disposing of clean up material and leaked and spilled fluids.
3.
Using output shaft seal and dust shield remover, remove dust shield (Figure 1, Item 4) and oil seal
(Figure
1,
Item
5) from bore of transmission housing (Figure 1, Item 6). Discard oil seal.
6
7
4
9
1
2
3
5
4
6
5
4
M7032DAA
6
7
5
8
Figure 1.
Transmission Output Shaft Yoke and Oil Seal Removal.
END OF TASK
TM 9-2320-272-23-3
0376
0376-2
Back to Top
