TM-9-2320-272-23-3
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 3 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-3 - Page 403 of 1469
REMOVAL
CAUTION
Clean area around breather before removal to prevent entry of dirt. Damage may occur if dirt
or dust enters the transmission.
1.
Disconnect vent line (Figure 1, Item 2) from transmission breather (Figure 1, Item 1).
2.
Remove breather (Figure 1, Item 1) and adapter (Figure 1, Item 4) from transmission (Figure 1, Item 3). Discard
breather and adapter if threads are stripped.
4
M8064DAA
1
2
3
Figure 1.
Transmission Breather Removal.
END OF TASK
INSTALLATION
NOTE
Male pipe threads must be wrapped with antiseize tape before installation.
1.
Install adapter (Figure 2, Item 4) and breather (Figure 2, Item 1) on transmission (Figure 2, Item 3).
2.
Connect vent line (Figure 2, Item 2) to transmission breather (Figure 2, Item 1).
TM 9-2320-272-23-3
0384
0384-2
Back to Top
