TM-9-2320-272-23-3
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 3 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-3 - Page 580 of 1469
FIELD MAINTENANCE
FRONT AXLE DRIVE COMPANION FLANGE REPLACEMENT
INITIAL SETUP:
Tools and Special Tools
Tool Kit, General Mechanic's: Automotive
(Volume 5, WP
0826, Table 1, Item 56)
Wrench, Torque, Click, Ratcheting, 1/2" Drive,
250 Ft-Lb
(Volume 5, WP
0826, Table 1, Item 63)
Materials/Parts
Adhesive, Silicone Rubber
(Volume 5, WP
0825, Table 1, Item 4)
References
Volume 5, WP
0820
Equipment Condition
Parking brake set. (TM 9-2320-272-10)
REMOVAL
1.
Remove ten screws (Figure 1, Item 4) and washers (Figure 1, Item 5) from axle drive flange
(Figure
1,
Item
6).
2.
Install two screws (Figure 1, Item 4) in threaded holes (Figure 1, Item 3) and turn screws evenly until flange
(Figure 1, Item 6) separates from hub (Figure 1, Item 1).
3.
Remove two screws (Figure 1, Item 4) from axle drive flange (Figure 1, Item 6).
4.
Remove gasket (Figure 1, Item 7) if present. Discard gasket and/or clean gasket sealant or sealant remains
from mating surfaces.
2
4
3
7
1
6
5
M9167DAA
Figure 1.
Front Axle Drive Companion Flange Removal.
END OF TASK
TM 9-2320-272-23-3
0408
0408-1
Back to Top
