TM-9-2320-272-23-3
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 3 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-3 - Page 672 of 1469
REAR WHEEL DUST COVERS REMOVAL
1.
Remove two tiedown straps (Figure 2, Item 7) and ABS wheel sensor lead (Figure 2, Item 9) from 3-way clip
(Figure 2, Item 11). Discard tiedown straps.
2.
Disconnect ABS wheel sensor lead (Figure 2, Item 9) from ABS main wiring harness lead A2 blue
(Figure
2,
Item 10) and remove six tiedown straps (Figure 2, Item 7) from ABS wheel sensor lead.
3.
Remove four screws (Figure 2, Item 5), lockwashers (Figure 2, Item 4), and two dust covers (Figure 2, Item 3)
from rear brake assembly (Figure 2, Item 8). Discard lockwashers.
4.
Remove three rubber plugs (Figure 2, Item 1), rubber plug (Figure 2, Item 6), ABS wheel sensor lead
(Figure
2, Item 9), and two plastic plugs (Figure 2, Item 2) from dust covers (Figure 2, Item 3).
10
11
1
2
3
4
5
6
7
8
9
M9888DAA
Figure 2.
Wheel Dust Covers Removal.
END OF TASK
TM 9-2320-272-23-3
0424
0424-3
Back to Top
