TM-9-2320-272-23-3
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 3 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-3 - Page 674 of 1469
REAR WHEEL DUST COVERS INSTALLATION
1.
Route ABS wheel sensor lead (Figure 4, Item 9) through upper dust cover (Figure 4, Item 3) and connect ABS
wheel sensor lead (Figure 4, Item 9) to ABS main wiring harness 2A blue lead (Figure 4, Item 10). Secure ABS
wheel sensor lead to 3-way clip (Figure 4, Item 11) and air line with eight tiedown straps (Figure 4, Item 7).
2.
Install three rubber plugs (Figure 4, Item 1), rubber plug (Figure 4, Item 6), and two plastic plugs
(Figure
4,
Item 2) on dust covers (Figure 4, Item 3).
3.
Install two dust covers (Figure 4, Item 3) on left rear brake assembly (Figure 4, Item 8) with four lockwashers
(Figure 4, Item 4) and screws (Figure 4, Item 5).
M9889DAA
10
11
1
2
3
4
5
6
7
8
9
Figure 4.
Wheel Dust Covers Installation.
END OF TASK
END OF WORK PACKAGE
TM 9-2320-272-23-3
0424
0424-5/6 blank
Back to Top
