TM-9-2320-272-24-2
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL; VOLUME 2 OF 4
JUNE 1998
TM-9-2320-272-24-2 - Page 86 of 991
TM 9-2320-272-24-2
3-246. BUMPERETTE REPLACEMENT
THIS TASK COVERS:
a. Removal
INITIAL SETUP:
b. Installation
APPLICABLE MODELS
REFERENCES (TM)
M923/A1/A2, M925/A1/A2, M927/A1/A2,
TM 9-2320-272-10
M928/A1/A2
TM 9-2320-272-24P
TOOLS
EQUIPMENT CONDITION
General mechanic’s tool kit (Appendix E, Item 1)
Parking brake set (TM 9-2320-272-10).
MATERIALS/PARTS
Six locknuts (Appendix D, Item 294)
NOTE
Left and right bumperettes are replaced in the same way. This
procedure covers left bumperette.
1.
Remove four locknuts (2) and screws (7) from left hand frame rail (1) and bumperette (6). Discard
locknuts (2).
2.
Remove two locknuts (3), screws (5), and bumperette (6) from rear crossmember (4). Discard
locknuts (3).
b. Installation
1.
Install bumperette (6) on rear crossmember (4) with two screws (5) and new locknuts (3).
2.
Install bumperette (6) on left hand frame rail (1) with four screws (7) and new locknuts (2).
3-694
Back to Top
