TM-9-2320-273-34

TRUCK TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1980

TM-9-2320-273-34 - Page 379 of 801

TM 9-2320-273-34

(4) Replace the output shaft housing oil seal in bearing. Apply silicone grease (item 22, App B)

to the outside diameter of the seal and Iubriplate (item 16, App B) to the inside diameter of the seal.

(5) Apply silastic gasket material (Item 29, App B) to the mating surface for the bearing

retainer cap gasket. Install the gasket and apply silastic gasket material to the outside of the gasket.

(6) Install the bearing retainer cap over the studs (fig. 8-54). Oil the studs and install the six

Iockwasher and nuts. Torque the nuts to 25 Ib-ft (34 NŽm). Install yoke spacer over splined end of shaft.

TA 074234

Figure 8-54. Lower Front Output Shaft Bearing Retainer Cap Installation.

8-39