TM-9-2320-273-34

TRUCK TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1980

TM-9-2320-273-34 - Page 381 of 801

TM 9-2320-273-34

(9)

Install the access pluq for the shift fork Iockscrew. Install two breathers (fig. 8-

56).

TA 074236

Figure 8-56 Completed Declutch and Front Output Shaft Assembly.

(10) On

the front side of the case, apply Iubriplate (item 16, App B) to the pilot bushing

cavity in the end of the lower rear output shaft.

(11) Apply silastic gasket material (item 29, App B) to the mating surface for the declutch

housing gasket. Install the gasket over the mounting studs and apply silastic gasket material to the out-

side of the gasket.

(12) Install

and nuts. Torque the

the front output shaft and declutch housing assembly (fig. 8

nuts to 40 Ib-ft (54 NŽ.m). .

Figure 8-57 Front Output Shaft and Declutch Housing Installation.

.57). ten Iockwasher

TA 074237

8-41