TM-9-2320-273-34

TRUCK TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1980

TM-9-2320-273-34 - Page 386 of 801

TM 9-2320-273-34

(b) press the shaft, with lock key, into the gear until the shaft shoulder is firmly seated

against the gear face (fig. 8-62).

TA 074242

Figure 8-62 Input Shaft Gear Installation.

(c) place the splined end of the shaft down. Set the bearing spacer over the shaft with

the chamfered end of the spacer toward the gear (fig. 8-63).

Figure 8-63. Input Shaft Spacer Installation.

TA 074243

8-46