TM-9-2320-273-34

TRUCK TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1980

TM-9-2320-273-34 - Page 391 of 801

TM 9-2320-273-34

e. Install the Propeller Shaft Yokes.

(1) Install yokes over the splines of the top front input shaft, lower front output shaft, and

lower rear output shaft.

(2) Apply silicone sealant (item 24, App B) to the end of each shaft (fig. 8-70).

TA 074249

Figure 8-70. Apply Silicone S&alant to the Shaft End.

(s) Install the yoke plate ends with two lubricated capscrews.

(4) Torque the capscrews to 60 Ib-ft (81 NŽm) and secure with Iockwire.

8-7. Installation (Refer to para 2-13c.)

8-51