TM-9-2320-273-34

TRUCK TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1980

TM-9-2320-273-34 - Page 396 of 801

TM 9-2320-273-34

NOTE

It is not necessary to remove either the

cross tube arm or the steering arm from

the knuckle (steps (4) and (5)) unless

service is required.

(4) Remove the cotter pin and nut from the cross tube arm and disassemble the cross tube arm

and key from the knuckle.

(5) Remove the cotter pin and nut from the steering arm and disassemble the steering arm and

key from the knuckle.

(6) Remove three capscrews and lockwashers from the top and bottom knuckle cap. Remove

the caps and gaskets (fig. 9-3). Remove the lubrication fitting in the cap if damaged.

TA 074252

Figure

9-3.

Steering Knuckle Caps Removal.

9-4