TM9-2320-273-34
1.
DRIVE COUPLING
2. CRANKSHAFT COUPLING
SPLINES
Figure 14-30. Install Drive
The air compressor must be
TA 074386
Coupling.
timed to the
engine when installed. Before proceeding
be sure that the “A” timing mark is alined
as performed during removal. (Refer to
para 14-3b (11).
(2)
Utilizing drive coupling turn the crankshaft so that the allen head plug at the. rear of the
crankshaft is positioned between two o’clock and three o’clock as viewed from the rear of the air
compressor (fig. 14-31).
14-28
CAUTIO N