TM-9-2320-273-34

TRUCK TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1980

TM-9-2320-273-34 - Page 669 of 801

TM 9-2320-273-34

19-8. Repair of Sliding Rear Window Assembly (M916 and M920.

a

.

Stationary Glass Removal.

(1)

Remove top and bottom outer frame filler plugs (1, fig. 19-1

7).

(2)

Remove two screws (11 ) from stationary end rail assembly (14) and pull glass (16) and

glazing strip (15) out of outer frame (12).

(3)

Check glazing strip (15) and vinyl seal (13) for signs of cracks or damage, and replace if

necessary.

b.

Sliding Glass Removal.

(1)

Slide glass assembly to latched position.

(2)

Remove two screws (3) from slide frame end rail (4) and remove end rail.

(3)

Pull glass (2) and glazing strip (6) out of slide frame (7).

(4)

Check glazing strip (6) and weather strip (5) for signs of cracks or damage and replace

if necessary.

(5)

Replace latch assembly (9) by removing two screws (8).

(6)

Check run channel (10) for damage or deterioration and replace if necessary.

c.

Stationary Glass Installation.

(1)

Slide glass (16) with dazing strip (15) attached into outer frame (12).

(2)

position stationary end rail assembly (14) in place making sure that glazing strip (15)

seats properly, and secure with two screws (11 ).

(3)

Install top and bottom outer frame filler plugs (1) starting at stationary end rail assembly

(14).

d.

Sliding Glass Installation.

(1)

Slide glass (2) with glazing strip (6) attached into slide frame (7).

(2)

Position slide frame end rail (4) in place, making sure that a glazing strip (6) seats proper-

ly, and secure with two screws (3).

19-18