TM-9-2320-273-34

TRUCK TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1980

TM-9-2320-273-34 - Page 682 of 801

TM 9-2320-273-34

19-16. Assembly.

a.

Inspect vent window rubber seal (fig. 19-21 ),replace if defective.

b.

Position vent window and frame in door and secure with fastening screws.

c.

Install lower door latch (fig. 79-20, sheet 2) in door and secure with four nuts and lock-

washers. Attach upper rod to latch and secure with clip.

d.

Mount windows cranking mechanism in door and secure with four screws.

e.

Install inner door handle in door and secure with four Iockwashers and nuts. Install door pull

with two screws, if removed.

f.

Slide window glass up into window channel.

9.

Install vertical window channel with nut at base and screw at top.

h.

Install upper door latch and connect latch rod. Secure door latch to door with four screws

(fig. 79-20, sheet 1).

i.

Check operation of door latches and window cranking mechanism.

i

Install inner door panel with twenty-one screws.

k.

Install door check strap assembly with three screws and washers.

/.

Install hinge with twelve screws.

m.

InstalI ash receptacle with two screws.

n.

Install crank handle with clip using retainer pliers.

19-31/19-32 (Blank)