7-23. RIGHT PARKING BRAKE CABLE REPLACEMENT (Cont’d)
TM 9-2320-280-20-2
Change 3
7-57
FOLLOW-ON TASKS: • Adjust parking brake lever (TM 9-2320-280-10).
• Install muffler and catalytic converter (M1123 and “A2” vehicles only) (para. 3-49).
• Install muffler and insulator (all models except M1123 and “A2” vehicles)
(para. 3-48).
NEW CONFIGURATION
2.
Slide parking brake cable clamp (33) onto parking brake cable assembly (4) and install on clamp
bracket (34) with lockwasher (32) and capscrew (31).
3.
Slide parking brake cable clamp (30) on parking brake cable assembly (4) and install on clamp
bracket (34) with capscrew (29), lockwasher (28), and locknut (27).
4.
Install two parking brake cable clamps (6) on parking brake cable assembly (4) and install parking
brake cable clamps (6) on underbody (12) with two capscrews (5).
5.
Install parking brake cable sleeve (7) to “C” beam (10) and parking brake cable (11) to equalizer
bar (9) with retaining ring (8).
CAUTION
Ensure that the caliper cable bracket is secure with no signs of
looseness and the lever is in contact with the caliper cable bracket
stop. Damage to equipment and poor performance will result if
not aligned properly.
6.
Install parking brake cable sleeve (17) to caliper cable bracket (2) with cable retaining ring (1).
7.
Install bracket clevis (19) on rear caliper lever (22) with clevis pin (18), washer (20), and cotter pin (21).