TM-9-2320-280-20-3
TRUCK, UTILITY: M998 SERIES
TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3
JANUARY 1996
TM-9-2320-280-20-3 - Page 156 of 1168
10-82. REARVIEW MIRROR MAINTENANCE
Remove two capscrews (3), lockwashers (4), washers (5), upper mounting bracket (1), lower mounting
bracket (6), and mirror assembly (2) from windshield frame (7). Discard lockwashers (4).
NOTE
For inspection and removal of blind rivet or insertnut, refer to para. 10-66.
Inspect blind rivet or insertnut (8) for damage. Replace with insertnut if damaged.
b. Inspection
This task covers:
a. Removal
d.
Assembly
b. Inspection
e.
Installation
c. Disassembly
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Three locknuts (Appendix G, Item 128)
Four lockwashers (Appendix G, Item 134)
Two locknuts (Appendix G, Item 79)
Manual References
TM 9-2320-280-24P
NOTE
Left and right rearview mirror removal procedures are basically
the same. However, the left side rearview mirror upper mounting
bracket may be mounted on the top (All A2 Series or M1123) or
bottom (Basic/A1 Series) of the mirror assembly. This procedure
covers the left rearview mirror.
a. Removal
TM 9-2320-280-20-3
Change 2
10-133
2
8
7
~
1
4
5
3
6
Back to Top
