TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 1185 of 1318

TM 9-2320-328-13&P-1

0106-17

DRAFT

0106

Change 1

.

HWT0827

.

WARNING

.

ICON 3

.

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry

and tools may short across electrical circuits and cause damage to equipment, or

severe burns or electrical shock to personnel.

.

Step 24.

Put EMERG MASTER and SIDE WARNING switches to off position (WP 0004).

Turn

Service Drive Lights Off (TM 9-2320-422-10).

Pull battery disconnect switch to off

position (WP 0007).

Remove driver side rear light bezel cover (WP 0335).

Disconnect

driver side body wire harness side warning light connector from a non-operating upper

side warning light (WP 0231).

With a test lead set, check for continuity across

wire 2640 (black) from driver side body wire harness warning light connector to a known

good ground.

.

If there is no continuity, go to Step 26.

.

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION