TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 1190 of 1318

TM 9-2320-328-13&P-1

0106-22

DRAFT

0106

Change 1

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

HWT3302

.

WARNING

.

ICON 3

.

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry

and tools may short across electrical circuits and cause damage to equipment, or

severe burns or electrical shock to personnel.

.

Step 30.

Put EMERG MASTER and SIDE WARNING switches to off position (WP 0004).

Turn

Service Drive Lights Off (TM 9-2320-422-10).

Pull battery disconnect switch to off

position (WP 0007).

Remove passenger side light bezel cover (WP 0335).

Disconnect

passenger side body wire harness side warning light connector from non-operating

upper side warning light (WP 0231).

With a test lead set, check for continuity across

passenger side body wire harness wire 2740 (black) from passenger side body wire

harness warning light connector, terminal 1 to a known good ground.

.

If there is no continuity, go to Step 32.

.

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION