TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 1184 of 1318

TM 9-2320-328-13&P-1

0106-16

DRAFT

0106

Change 1

.

HWT0827

.

Step 23.

Put EMERG MASTER and SIDE WARNING switches to off position (WP 0004).

Turn

Service Drive Lights Off (TM 9-2320-422-10).

Pull battery disconnect switch to off

position (WP 0007).

Disconnect driver side body wire harness side warning light

connector from non-operating upper side warning light (WP 0231).

With a test lead set,

check for continuity across driver side body wire harness wire 2640 (black) from

warning light connector, terminal 1 to a known good ground.

.

a.

If there is continuity, repair wire 1650 in driver side body wire harness if

repairable (TM 9-2320-325-14&P), or replace driver side body wire

harness (WP 0286).

.

b.

If there is no continuity, repair wire 2640 in driver side body wire

harness if repairable (TM 9-2320-325-14&P), or replace driver side

body wire harness (WP 0286).

.

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION