TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 1189 of 1318

TM 9-2320-328-13&P-1

0106-21

DRAFT

0106

Change 1

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

HWT3302

.

Step 29.

Put EMERG MASTER and SIDE WARNING switches to off position (WP 0004).

Turn

Service Drive Lights Off (TM 9-2320-422-10).

Pull battery disconnect switch to off

position (WP 0007).

Remove passenger side light bezel cover (WP 0335).

Disconnect

passenger side body wire harness side warning light connector from non-operating

upper side warning light (WP 0231).

With a test lead set, check for continuity across

passenger side body wire harness wire 2740 (black) from passenger side body wire

harness warning light connector, terminal 1 to a known good ground.

.

a.

If there is continuity, repair wire 1650 in passenger side body wire

harness if repairable (TM 9-2320-325-14&P), or replace passenger

side body wire harness (WP 0298).

.

b.

If there is no continuity, repair wire 2740 in passenger side body wire

harness if repairable (TM 9-2320-325-14&P), or replace passenger

side body wire harness (WP 0298).

.

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION