TM 9-2320-328-13&P-1
0107-3
DRAFT
0107
Change 1
.
HWT0819A
.
WARNING
.
ICON 3
.
Remove rings, wristwatches, neck chains, and any other jewelry before working
around vehicle.
Jewelry can catch on equipment and cause serious injury.
Jewelry
and tools may short across electrical circuits and cause damage to equipment, or
severe burns or electrical shock to personnel.
.
Step 4.
Put EMERG MASTER, ROOF EMERGENCY LIGHTS, F/R LOWER WARNING, SIDE
WARNING, UPPER REAR WARNING, and OVERHEAD WARNING switches to off
position (WP 0004).
Remove cab instrument panel A (WP 0205).
Swap relays 12 and
13 (WP 0244).
Put EMERG MASTER and UPPER REAR switches to on position
(WP 0004).
Check if upper rear warning lights operate.
.
a.
If upper rear warning lights operate, return relays to original positions
and replace relay 13 (WP 0244).
.
b.
If upper rear warning lights do not operate, replace cab power
distribution wire harness and block (WP 0280).
.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION