TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

  TM-9-2320-328-13-P-1 - Page 1196 of 1318

TM 9-2320-328-13&P-1
0107-2
DRAFT
0107
Change 1
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
HWT3253
.
Step 1.
Push battery disconnect switch to on position (WP 0007).
Turn Service Drive Lights On
(TM 9-2320-422-10).
Put EMERG MASTER and UPPER REAR WARNING switches to
on position (WP 0004).
Check if at least one upper rear warning light operates.
.
If at least one upper rear warning light operates, go to Step 12.
.
Step 2.
Put OVERHEAD WARNING switch to on position (WP 0004).
Check if overhead
warning beacon operates.
.
If overhead warning beacon operates, go to Step 5.
.
Step 3.
Put F/R LOWER WARNING, ROOF EMERGENCY LIGHTS, and SIDE WARNING
switches to on position (WP 0004).
Check if front, rear, roof, and/or side warning lights
operate.
.
If front, rear, roof, and/or side warning lights do not operate, troubleshoot
Warning Lights (All) Do Not Operate (WP 0100).
.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION


Back to Top