TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 1188 of 1318

TM 9-2320-328-13&P-1

0106-20

DRAFT

0106

Change 1

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

HWT3301

.

WARNING

.

ICON 3

.

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry

and tools may short across electrical circuits and cause damage to equipment, or

severe burns or electrical shock to personnel.

.

Step 28.

Put EMERG MASTER and SIDE WARNING switches to off position (WP 0007).

Turn

Service Drive Lights Off (TM 9-2320-422-10).

Remove passenger side light bezel cover

(WP 0335). Disconnect passenger side body wire harness side warning light connector

from operating side warning light (WP 0231).

Disconnect passenger side body wire

harness side warning light connector from non-operating upper side warning light

(WP 0231).

Connect passenger side body wire harness side warning light connector

that was disconnected from operating warning light to non-operating side warning light.

Turn Service Drive Lights On (TM 9-2320-422-10).

Put EMERG MASTER and SIDE

WARNING switches to on position (WP 0004).

Check if non-operating warning light

operates.

.

If non-operating warning light does not operate while connected to operating

warning light connector,

replace non-operating warning light (WP 0231).

.

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION